RCS has remade the pancake holster with our new, nearly unbreakable Pancake Wings. These loops replace your standard belt loops on the holster shell turning it into a close, low profile pancake-style holster.
As always, you have options. You can now select your belt size for a more perfect fit. We have added an "offset" bend in the loops. This allows for a tight, tighter, and tightest fit depending on how you mount the wings. You can mount them to the inside face of the holster with the logo facing outward for the tight fit. This allows the easiest belt threading and gives you more room to seat the grip. Swap the wings front to back and mount with the logo facing inward to give you an even closer pull to your side. Finally, you can mount the wings on the outside face of the holster with the logo facing outward. This will lever the holster even tighter into your side. You can also try mounting the wing higher or lower to adjust the cant angle or even mount them upside down to play with different fore/aft cant and fit options.
We encourage you to "play" with these to find the sweet spot of comfort and concealment. The only rules to follow as you experiment is that the posts should always seat against the pancake and the screws should always seat against the brass eyelet of the holster. The rubber o-ring should always sandwich between the wings and the holster.
As always, we recommend that once you find a configuration you like, apply some non-permanent thread locking product to the screws to prevent them from backing out during use and check your gear regularly.
Sold in pairs.
Showing reviews 1-10 of 44 | Next
Posted by Brian on 18th Sep 2017
It's nice and I feel like it holds the gun closer to my body compare daily to the original hard belt loops. Still not as good as an IWB.
Posted by FireMedic765 on 31st Aug 2017
I purchased these out of necessity. RCS used to be a Great Company that really took care of the average customer. Even though their prices were high and wait times were long, I used to really enjoy dealing with them because I knew I would get exactly what I needed and the quality would be next to none. I understand that a company wants to make money, but I can't help but feel they are more concerned about their Government and Private Contrator Accounts than the average buyer. As far as this product goes, they are Kydex and they do what they are supposed to do. There is nothing special about them and the price is a little high for what they are.
Posted by Mark on 13th Aug 2017
Typical great RCS quality! In still tinkering with all the possibilities as to mounting my Phantom with the wings. There are a ton of ways to do it. Once I find that sweet spot, I'll loctite it and be good to go.
Posted by Dudley A Long on 20th May 2017
Shipped quickly. Installed in less than 5 minutes for my owb Glock 19 holster. Holds holster snug with my leather belt. I fully recommend if you want the owb holster as close to the body as you can get. Does not interfere with the draw stroke.
Posted by Unknown on 8th May 2017
The Sig P320C Holster with the OWB wings make the perfect fit for me.
Posted by Tim McGorman on 8th May 2017
They fit perfectly on the holster. Great service and fast shipping. Thank you.
Posted by ekinneSAGAT on 5th May 2017
Excellent product that does exactly as advertised. I bought a set of the coyote tan wings and installed them on an existing OWB holster for my CZ P09. What a world a difference in terms of concealment from the factory hard loops. Pulls holster tight into body and bears the weight better than almost any owb option I've tried.
Posted by David on 6th Mar 2017
I've used a variety of Raven holsters and kydex holsters in general and find the traditional belt loops don't pull the gun tight into my body the way a traditional leather pancake holster would. Switching out to these and using them in the "most concealable" manner gives me a similar result to the leather pancake and I find that there is less holster movement on my belt and a flatter more concealable shape. These loops can be installed in front or behind the holster body to create different amounts of "pull" into the body. I use the outside position to create the most pull and therefore lowest profile shape.
Posted by Unknown on 13th Feb 2017
Held the 1911 closer to the body and fit my 1.75 g-code belt perfectly
Posted by Unknown on 5th Dec 2016
Very fast shipping and they pull the holster very tight to the body.
Showing reviews 1-10 of 44 | Next