Our Surefire Pocket Clip is designed as a simple way to add a functional, durable pocket clip to your one-inch body Surefire flashlight. Just remove the tailcap, batteries and o-ring seal from your light and carefully slip the pocket clip down over the threads. Then re-assemble your light and you're ready to carry. Each clip comes with a handy finger ring, or you can use any lanyard you'd like on the built in lanyard loop.
Posted by dvc on 17th Jun 2016
Great idea, but as son as you try to clip it into your pocket the whole clip spins and spreads coming out of the torch groove.
Maybe a thin washer should be included.
Lets see if it retains some strenght.
Posted by Raymond Guerra on 31st Jul 2015
Effective in both cost and function. If you have a TAC light you need this.
Posted by Roman on 9th Jul 2015
I think it's a great idea however it didn't work the metal ring looked something like a crush washer but worse when i screwed on the tail cap it wasn't aligned so it made one end of the ring bend outward making a sharp edge where you're supposed to grip the light so i thought maybe ill loosen it up a bit so it wouldn't do that but then the light didn't function properly because the tail cap wasn't getting enough contact with the batteries
Like i said great idea but hard fail in quality control
Posted by Unknown on 2nd Jul 2015
I received the clip on time and it was easily placed on my 6P Defender. It greatly enhanced the usability of this light. I would highly recommend the product.
Posted by Eric Lycan on 27th Jun 2015
I have had this clip for a short time but I have loved it, I position the light in my front left pocket and that makes it easy to draw and position the light in my hand wether using it or letting it hang. The pocket clip also makes a handy place to use a cigar grip against a knuckle.
Posted by Unknown on 12th Jun 2015
The metal part that goes around the flashlight it's self was severly bent inward when product arrived. Barely fit on my light (gouged my threads and cut my O-ring) and once I would tighten the tail cap down the metal part that goes around the light would be pushed out of the grove. This is all on a Surefire 6px. When I install the product on my Surefire g2x the clip just spins around freely. I sent it back (I paid shipping) for repare and they sent me a new one within a couple weeks. The new one works, but I had to bend it myself to get the clip close enough to the body of the light so it would have adequate retention. It does help with reloads being able to sling the light to the other side of your hand and all but the main advantage is the clip feature. All in all I would say that Reven Concealment quality control is an epic fail but the actual product is OK. Look at other options thorowly before purchasing.
Posted by Unknown on 11th Jun 2015
Overall I like the pocket clip. I bought it for the G2X Tactical. The clip is a little hard to get on at first just make sure you don't screw up the threading and o-ring. After getting it on you just have to work with it. The only fault I have is the clip is designed so that it flares out and does not touch the flashlight. When I put it in my pocket it did not stay and would have fallen out. I fixed this by bending the clip so that the bottom of it would snag onto the pocket and stayed there. The o- ring design is awesome and is made very well plus the fact you can remove it and put shock cord where the o- ring goes. As most would know with Surefire lights the clips are the worst and this one is definitely better then those. So far it works good and only time will tell.
Posted by sam on 28th May 2015
So i was really super excited about this product it looked like a solid simple design. Unfortunately this was not the case mine came either broken or designed very poorly when installing on my fury it tore the threads up and almost ripped the o ring up there is a big tear in it now and it scratched up the outside of the light to top it off ive tried to get ahold of someone at raven and no one has contacted me back no email or phone call so i have given them an opportunity to remedy the situation what a shame looks like im out my 20 bucks. So in short only buy if you want to damage your really expensive flashlight.
Posted by Richard on 17th Apr 2015
Where the clip goes around the body had a break for re-installing another finger ring, I found it sharp, not shaped tru to the barrel and difficult to keep from damaging both the threads and the Surefire O-ring while installing. It also apears the cap on the Nitrolon is thiner and does not compress the clip ring wihout gouging it.
I have both G2's, one metal, one Nitrolon, the threads and o-rings can be damaged. This could have been a simple remove the cap, drop on and screw the cap back on for satisfaction, alas it was not and these are not cheap.
Posted by Dave on 9th Apr 2015
I have a klarus xt11, and the clip fits perfect. The metal is strong, and I can't see it ever breaking under heavy use